Aeg-Electrolux 88031K-IN 96R Uživatelský manuál stáhnout pdf (Strana 26)

Installation Instructions26

width of at least 3 mm.

Suitable isolation devices include line protecting cut-outs, fuses (screw type fus-

es are to be removed from the holder), earth leakage trips and contactors.

Sticking the seal in the rabbet

• Clean the rabbet in the work surface.

• Stick the one-sided self-adhesive sealing tape supplied onto the upper surface

of the rabbet along the edges of the cut-out section.

– Cut the sealing tape into four pieces relating to the length of the edges of

the rabbet.

– For the four corners of the rabbet the ends of the sealing tapes must be cut

into mitres. Do not stick the ends over one another.

– Stick the sealing tape flush into the corner of the rabbet, so that no silicon

compound can get under the glass ceramic when grouting.

– Don’t stretch the tapes when sticking them on.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 95 96

Žádné komentáře

Aeg-Electrolux 88031K-IN 96R Uživatelský manuál Strana 26