
CARE AND CLEANING
WARNING!
Refer to "Safety information" chapter.
• Clean the front of the appliance with a soft cloth with warm water and cleaning agent.
• To clean metal surfaces use a usual cleaning agent
• Clean the oven interior after each use. Thus you can remove dirt more easily and it
does not burn on.
• Clean stubborn dirt with a special oven cleaner.
• Clean all oven accessories (with a soft cloth with warm water and cleaning agent) af-
ter each use and let them dry.
• If you have nonstick accessories, do not clean them using an aggressive agents, sharp
edged objects or dishwasher. It can destroy nonstick coating!
Pyrolytic cleaning
WARNING!
The oven becomes very hot. Keep children away.
1. Remove all parts from the oven.
2. Remove the worst of the residue manually.
3. Set oven function Pyroluxe menue
– "3:15" appears in the display,
–Duration
flashes for approximately 5 seconds.
While Duration
flashes, use + or - to set the necessary length for the procedure.
You can set "2:15" (P2 - Pyroluxe menue light) for less dirt and "3:15" (P1 - Pyroluxe
menue intensive) for more dirt.
If Duration no longer flashes, push the Selection button again and then set length
for the pyrolytic procedure.
You can also change switch off time for pyrolytic cleaning using the clock function
End
(within 2 minutes of the pyrolytic cleaning starts).
4. Pyrolytic cleaning starts.
During pyrolytic cleaning the light does not operate.
When the oven reaches pre-set temperature, the door locks.
The bars of the heat indicator come up, until the door unlocks again.
Oven lamp
WARNING!
There is a danger of electrical shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch off the circuit breaker.
Put a cloth on the bottom of the oven for protection of the oven light and glass cover.
24
Care and cleaning
Komentáře k této Příručce