HG694340NBIE GB ENGAS HOB USER MANUAL
fied electrician, e.g. your local Electricity Board, or a contractor who is on the roll of theNational Inspection Council for Electrical Installation
The replacement of electric cable must be carried out exclusively by the service force centreor by personnel with similar competencies, in accordance
a) Removable panelb) Space for connectionsKitchen unit with ovenThe hob recess dimensions must obey the indication and the kitchen unit must be equipp
OPERATIONIgnition of the burnerWARNING!Be very careful when you use open fire in kitchen environment. Manufacturer decline anyresponsibility in case m
If the burner accidentally goes out, turn the control knob to the off position and try to lightthe burner again after minimum 1 minute.The spark gener
WARNING!Flame diffuser are not recommended.Information on acrylamidesImportant! According to the newest scientific knowledge, if you brown food (speci
3. At the end rub the appliance dry with a clean cloth.To keep the pan supports in the correct position, they are hooked into hinges at the back ofthe
Labels supplied with the accessories bagStick the adhesive labels as indicated below:MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMODELMODELMOD.PROD.NO
TOTAL POWER: G20 (2H) 20 mbar = 7.7 kWG30 (3+) 28-30 mbar = 545 g/hG31 (3+) 37 mbar = 536 g/hElectric supply: 230 V ~ 50 Hz3 core flexible cable with
please contact your local council, your household waste disposal service or the shop whereyou purchased the product.Packaging materialThe packaging ma
FOR PERFECT RESULTSThank you for choosing this AEG product. We havecreated it to give you impeccable performance for manyyears, with innovative techno
www.aeg.com/shop 397202201-A-072011
CONTENTS4 Safety information6 Installation12 Product description13 Operation14 Helpful hints and tips15 Care and cleaning16 What to do if…17 Technical
SAFETY INFORMATIONWARNING!These instructions are only valid in the countries whose symbols appear on this booklet'scover.For your safety and cor
• Pots must not enter the control zone.• Do not use not stable cookware to prevent from tilt and accident.• Do not put flammable products or items tha
• This appliance is not connected to a combustion products evacuation device. It must beinstalled and connected in accordance with current installatio
Important safety requirementsThis hob must be installed in accordance with the Gas Safety (Installation and Use) Regula-tions (Current Edition) and th
1231 End of shaft with nut2 Washer3 ElbowConnection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or cop-per.The connec
Adjustment of minimum levelTo adjust the minimum level of the burners:1. Light the burner.2. Turn the knob on the minimum position.3. Remove the knob.
Komentáře k této Příručce