AEG Electrolux 700 D Provozní pokyny

Procházejte online nebo si stáhněte Provozní pokyny pro Nepřerušitelné zdroje napájení (UPS) AEG Electrolux 700 D. AEG Electrolux 700 D Operating instructions Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 18
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
1
PROTECT A.
PROTECT A.PROTECT A.
PROTECT A.
PROTECT A. 500
PROTECT A. 700
OPERATING INSTRUCTION UPS
Zobrazit stránku 0
1 2 3 4 5 6 ... 17 18

Shrnutí obsahu

Strany 1 - PROTECT A. 700

1 PROTECT A.PROTECT A.PROTECT A.PROTECT A. PROTECT A. 500 PROTECT A. 700 OPERATING INSTRUCTION UPS

Strany 2 - Instructions

10 double mains filters which provide effective protection against mains voltage peaks and high-frequency faults. In case of sustained mains

Strany 3 - Copyright

11 4 Set-Up and Operation Installing the UPS is as easy as following the steps shown. 4.1 Inspection Remove the UPS from its packaging and i

Strany 4

12 4.3 Charging This unit is shipped from the factory with its internal battery fully charged, however, some power may be lost du

Strany 5 - 2 Safety

13 Use one more internet line cable and plug one end of the internet line cable to the “Out” socket at the back of the PROTECT

Strany 6

14 After removing the front cover, follow Fig. 2 above to remove partition by unscrewing it. Then follow Fig. 3 to remove the battery. 4.1

Strany 7

15 In conjunction with the "intelligent" UPS, this ensures that the availability of IT components and data security are guaranteed.

Strany 8

16 5.1 Specifications MODEL PROTECT A. 500 PROTECT A. 700 Type power 500 VA / 300 W 700 VA / 420 W Input voltage 220 Vac / 230 Vac / 240 Va

Strany 9 - 3 System Description

17 6 Trouble shooting Symptom Cause Remedy Missing battery Charge battery up to 4 hours Battery fault Replace with the same type of batter

Strany 10

18 Guarantee certificate Type: …….…………………... Serial-no.: ……………………..……………...

Strany 11 - 4 Set-Up and Operation

2 1 Notes on these Operating Instructions Duty to Provide Information These operating instructions will help you to install and operate the Uninter

Strany 12 - 4.5 Data lines protection

3 etc. entered into by AEG and its representatives without prior notification in the event of maintenance and repair work being carried out with anyt

Strany 13 - 4.9 Battery removal

4 1.1 Declaration of Conformity

Strany 14

5 2 Safety 2.1 Important Safety Instructions Read these operating instructions carefully prior to commissioning of the PROTECT A. UPS a

Strany 15 - 5 UPS overview

6 The output may be live, even if the UPS is not connected to the mains supply, as the UPS has its own internal power supply (bat

Strany 16 - 5.1 Specifications

7 ♦ Never connect the mains input to the UPS output! ♦ Ensure that no fluids or foreign bodies can penetrate the UPS! ♦ Do not block the side air

Strany 17 - 6 Trouble shooting

8 Batteries can cause electric shocks and high short-circuit currents. Therefore, take the following safety precautions when working with bat

Strany 18 - Guarantee certificate

9 3 System Description i PROTECT A. is an uninterruptible power supply (UPS) for essential loads such as personal computers (PCs) or

Komentáře k této Příručce

Žádné komentáře